EdgeStar AP12000S-1 Owner's Manual download pdf (Page 14)

Operating the Control Panel

Use the Power button to turn the portable air conditioner on and off.

By default when you first use the power button, the unit will begin to

operate in cooling mode. The unit will remember the last used

mode/settings if you shut down and restart.

Auto-Restart: If power to the unit is interrupted, the air conditioner

will restart itself in its last used mode/settings once power is

restored. The compressor will restart after 3 minutes.

Cooling mode cools and dehumidifies the air. If the ambient

temperature drops below the temperature you selected, the

compressor turns off and the unit functions with the fan only. When

the temperature rises above the temperature you selected, the

compressor turns on again.

Whether your desired temperature can actually be reached

depends on the ambient conditions. The room temperature

remaining above the set temperature is normal.

To operate the unit in cooling mode:

1) Make sure the power cord is plugged into a power outlet.

2) Press the Power button.

3) Press the Mode button until the LED indicator next to “Cooling”

lights up.

4) Select the fan speed by using the Speed button.

5) Set the thermostat by using the Up and Down buttons. The

thermostat is adjustable between 61°F - 89°F in one degree

increments in cooling mode.

During the Dehumidifying mode, the unit will condense water out of

the air and exhaust it through the exhaust hose. The ambient

temperature in the room will probably drop by a few degrees while

using the Dehumidifying mode.

To operate the unit in dehumidifying mode:

1) Make sure the power cord is plugged into a power outlet.

2) Press the Power button.

3) Press the Mode button until the LED indicator next to

“Dehumidify” lights up.

Power

Cooling Mode

Dehumidifying Mode

NOTE: The exhaust hose

must be used in Cooling

mode in order to cool a

room.

NOTES: If the room temperature is below 77ºF, the fan will always run on low speed while in the

Dehumidifying mode. If you do not use the exhaust hose in Dehumidifying mode, you must

manually drain the water from the unit. Additionally, the ambient temperature in the room will

probably rise by a few degrees if you do not use the exhaust hose. You will be not be able to

change the thermostat temperature while in Dehumidifying Mode.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Comments to this Manuals

No comments

EdgeStar AP12000S-1 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Mobile air conditioners EdgeStar AP12000S-1