EdgeStar BR7000SS Owner's Manual download pdf (Page 15)

CLEANING AND MAINTENANCE

Periodic cleaning and proper maintenance will ensure efficiency, top

performance, and long life.

Exterior Cleaning

The door and cabinet may be cleaned with a mild detergent and

lukewarm water solution such as 2 tablespoons of baking soda to 1 quart

of water.

Do not use solvent based or abrasive cleaners. Use a soft sponge and

rinse with clean water. Wipe with a soft clean towel to prevent water

spotting. If the door panel is stainless steel, it can discolor when exposed

to chlorine gas and moisture. Clean stainless steel with a cloth dampened

with a mild detergent and warm water solution. Never use an abrasive or

caustic cleaning agent.

Interior Cleaning

The kegerator's interior should be cleaned occasionally.

1. Disconnect power to the unit.

2. Open the door and remove the contents.

3. Wait until the unit defrosts.

4. With a clean cloth, wipe down the interior of the unit.

5. Reconnect power to the unit.

TROUBLESHOOTING

Before Calling for Help

If the unit appears to be malfunctioning, read through the OPERATION

section of this manual first. If the problem persists, check the

Troubleshooting Guide below and on the following page. The problem

could be something that can easily be solved or explained.

Symptoms Possible causes Solutions

The kegerator turns on

and off frequently.

The room temperature is

higher than the

recommended ambient

environment.

Run the unit at the appropriate ambient temperature.

The door is being opened Minimize the number of times the door is opened

often.

The door is not completely Make sure the door is completely closed.

closed.

The door gasket is not

sealing properly.

Make sure the door gasket is properly sealing.

EdgeStar Built-in Kegerator 12

1 2 ... 10 11 12 13 14 15 16 17 18 19

No comments

EdgeStar BR7000SS Owner's Manual Page 15