EdgeStar AP10000HW Owner's Manual download pdf (Page 12)

Operation – Using the Remote Control

Operation – Adjusting the Louvers

Regulating air flow direction

FIG.14

Move the roller on the air vent to the

left or right to control the air flow

direction.

NOTICE !

1. To prolong the compressor's life, please wait at least 3 minutes before turning the

unit back on after shutting it off.

2. The cooling system will shut off if the ambient temperature is lower than the set one.

The fan, however, keeps working on the set level. If the ambient temperature rises

above the selected level, the cooling system will return to operation.

All the control panel functions can also

be set with the remote control.

1. LED Indicator – Lights up when

you press any of the buttons.

2. Power Button – Used to power the

unit on or off

3. Mode Button – Used to change

between auto, cooling, heating, or

fan modes.

4. Timer Button – Used to set the

timer function.

5. Up Button – Used to increase the

temperature.

6. Down Button – Used to decrease

the temperature.

7. Fan Speed Button – Used to set

the fan speed.

Note: The

remote uses

two AAA

batteries.

higher than the set one(still, the ventilation keeps working on the set level).

As the ambient temperature drops below the selected level, the heating will

order to melt the frost. As this occurs, just wait for the heating returns to work.

function during low temperature, sometimes the heating will stop for a while in

return to work.

3. On the contrary, the heating will swith off if the ambient temperature is

4. This machine is equipped with ANTI-FROST function. While using the heating

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

No comments

EdgeStar AP10000HW Owner's Manual Page 12