EdgeStar AP10000HW Owner's Manual download pdf (Page 15)

Maintenance – Cleaning the Unit

Always unplug the air conditioner from the power outlet before cleaning. Clean

the air conditioner regularly to maximize performance and efficiency.

Cleaning the unit

Use a soft damp cloth to wipe the body clean.

Use a soft bristle brush to clean between the control panel’s buttons.

Never use abrasive chemicals, gasoline, detergents, chemically treated cloths, or other

cleaning solvents that may damage the cabinet exterior.

Cleaning the pre-filter

Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt, then rinse

thoroughly under warm running water that is not hotter than 104

F. Dry thoroughly

before replacing.

Note: The activated carbon filter is not washable- replace it as needed. Contact

EdgeStar retailers for replacement filters.

Warning: Never operate the unit without the filters.

Follow the instructions below to prepare your product for storage.

1. Drain all the water from the unit

before storing. Operate the unit in

fan mode for a few hours to

thoroughly dry the inside.

2. Clean or change the filter.

3. Unplug and store the power cord

as shown.

4. Replace the unit in the original

carton, or cover it before storing

away.

FIG.20

Preparation for Storage

Cord

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

No comments

EdgeStar AP10000HW Owner's Manual Page 15