EdgeStar CWB7016DZ Owner's Manual download pdf (Page 8)

Electrical Requirements

Before you move your wine and beverage cooler into its final location, it is

important to make sure you have the proper electrical connection:

A standard electrical supply (115 V, 60Hz), properly grounded in

accordance with the National Electrical Code and local codes and

ordinances, is required.

It is recommended that a separate circuit, serving only your wine and

beverage cooler, be provided. Use receptacles that cannot be turned off

by a switch or pull chain.

The fuse (or circuit breaker) size should be 3 Amps.

Recommended grounding method

For your personal safety, this appliance must be grounded. It is equipped

with a power supply cord having a 3-prong grounding plug. To minimize

possible shock hazard, the cord must be plugged into a mating 3-pronged

wall socket, and grounded in accordance with the National Electrical

Code and local codes and ordinances. If a mating wall socket is not

available, it is the personal responsibility of the customer to have a

properly grounded, 3-prong wall receptacle installed by a qualified

electrician.

Leveling the Wine and Beverage Cooler

It is important for the wine and beverage cooler to be leveled in order to

work properly. It can be raised or lowered by rotating the plastic sheaths

around each of the front two feet on the bottom of the machine. If you find

that the surface is not level, rotate the feet until the wine and beverage

cooler becomes level .You may need to make several adjustments to

level it. We recommend using a carpenter’s level to check the machine.

1. Place a carpenter’s level on top of the product to see if the wine and

beverage cooler is level from front to back and side to side.

2. Adjust the height of the feet as follows:

Turn the leveling feet clockwise to lower that side of the cooler.

Turn the leveling feet counterclockwise to raise that side of the wine and

beverage cooler.

IMPORTANT: Once you are ready to install it in a cabinet or directly on

the floor, you must adjust the feet to level the wine and beverage cooler.

ELECTRIC SHOCK HAZARD!

 Plug into a grounded 3-prong outlet.

 Never remove the grounding prong from the plug.

 Never use an adapter to bypass the grounding prong.

 DO NOT use an extension cord.

 Failure to follow these instructions can result in fire,

electrical shock, or death.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

No comments

EdgeStar CWB7016DZ Owner's Manual Page 8