EdgeStar CWB7016DZ Owner's Manual download pdf (Page 7)

EdgeStar Wine and Beverage Cooler 4

Installation Clearance Requirements

When installing the wine and beverage cooler under a counter, follow the

recommended spacing dimensions shown.

• To ensure proper service access and ventilation, allow at least 2-3” of

clearance at the back of the unit. The installation should allow the unit to

be pulled forward for servicing, if necessary.

• The wine and beverage cooler should be installed on a firm and level

surface that will be able to support the entire weight of a fully loaded unit.

It is important for the wine and beverage cooler to be level in order to

work properly. If needed, you can adjust the height of the wine and

beverage cooler by rotating the feet. See the “Leveling the Wine and

beverage cooler” section.

• A standard electrical supply (115 VAC only, 60 Hz), properly grounded

in accordance with National Electrical Code and local codes and

ordinances is required.

Side View

Important Notes:

• Choose a location that has

ambient temperatures above

65°F and below 90°F.

Operation outside of these

temperatures may result in

lowered efficiency or cause

other adverse effects.

• This unit MUST be installed

in an area protected from the

elements, e.g., wind, rain,

water spray or drips.

• The wine and beverage

cooler should not be located

next to ovens, grills or other

high heat sources.

• Do not kink or pinch the

power supply cord between

the cooler and wall or cabinet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

No comments

EdgeStar CWB7016DZ Owner's Manual Page 7