EdgeStar IB450SS Owner's Manual

IB450SSClear Ice MakerOwner's ManualThis owner's manual providesinstructions on safe installation,use, and maintenance.

• To remove any remaining tape or glue, rub the area briskly with your thumb. Tape orglue residue can also be easily removed by rubbing a small amount

The ambient operational temperature should be between 50°F and 100°F. Theoperating water temperature should be between 41°F and 90°F. Operationoutside

Before you move your icemaker into its final location, it is important to make sure youhave the proper electrical connection:A standard electrical sup

To remove door from hinges:1. Using a Phillips screwdriver_ remove the screws and take off top hinge. Keep the partstogether and set them aside.3. Lif

IMPORTANT:1. All installations must be in accordance with local plumbing code requirements.2. Make certain that the pipes are not pinched or kinked or

provided you have access to a water supply andinstructions fora- Electrical requirementsb- Water supply and drainc- Leveling the icemaker.a drain. You

11. Have you checked for leaks at all water supply connections- and at the drain?Operating Method1. Turn on the water tap, let the water trough fill,

There are two distinct cycles: freeze and harvest.During the freeze cycle, water flows to the evaporator surface. In the harvest cycle, theice is rele

• Water running from the evaporator to the water bin may make a splashing sound.• As each cycle ends, you may hear a gurgling sound due to the refrige

There are 5 things to keep clean:1. The exterior.2. The interior.3. The condenser4. Water distribution tube5. The ice-making systemwith aMmake sure th

Be sure to stand the ice maker upright for at least 24 hoursprior to plugging it in.Installation only by a licensed plumber.

Condenser CleaningA dirty or clogged condenser prevents proper airflow, reduces ice making capacity, andcauses higher than recommended operating tempe

Minerals that are removed from water during the freezing cycle will eventually form ahard scaly deposit in the water system. Cleaning the system regul

...iL,Descriptions of LEDs and buttons:1. Ice Full (Red) LED: Ice Full indicator light.When this LED is lit, the

and the ice size will be smaller in the next cycle.IMPORTANT:• It is not recommended that the ice size be adjusted unnecessarily since this coulddamag

Problem Probable CorrectionPlug the ice maker in.Replace fuse.The machine won't Turn the ice maker power switch to ICEoperate. (ON)Take away some

LIMITED WARRANTYThis EdgeStar product is warranted to be free from defective workmanship and materialsfor the first year following the date of origina

Once an EdgeStar authorized representative has confirmed that your product is eligible forwarranty service, the product must be returned to our EdgeSt

Eidse.$tar®For product guides, additional troubleshooting resources, and up todate information, visit us on the web at: http://www.edgestar.cornEdgeSt

Thank you for purchasing this EdgeStar product. We are glad you chose us. We believethat your purchase of this product opens a relationship between yo

TABLE OF CONTENTSPageICE MAKER SAFETY ... 5IMPORTANT SAFEGUARDS ...

ICE MAKER SAFETYYour safety and the safety of others are very important.We have provided many important safety messages in this manual and on your app

IMPORTANT SAFEGUARDSBefore the ice maker is used, it must be properly positioned and installed asdescribed in this manual, so read the manual carefull

first batchof cubesmustbediscarded.• Neverturn thewatersupplytapoff whentheicemakeris working.• If theicemakerwill notbe usedfor alongtime,beforethene

I-'_( r]) k, r

panelWater inletower supplyce scoop... _ Drain hoseUnpackingICE MAKER INSTALLATIONExcessive Weight HazardUse two or more people to move and install