EdgeStar CWR460DZ User Manual download pdf (Page 7)

EdgeStar Wine Refrigerator 4

Installation Clearance Requirements

When installing the wine refrigerator under a counter, follow the

recommended spacing dimensions shown.

• To ensure proper service access and ventilation, allow at least 2/5”

clearance at the back, 1/5” at top and 1/5” at sides. The installation

should allow the unit to be pulled forward for servicing, if necessary.

• The wine refrigerator should be installed on a firm and level surface that

will be able to support the entire weight of a fully loaded unit. It is

important for the wine refrigerator to be level in order to work properly. If

needed, you can adjust the height of the wine refrigerator by rotating the

feet. See the “Leveling the Wine refrigerator” section.

• A standard electrical supply (115 VAC only, 60 Hz), properly grounded

in accordance with National Electrical Code and local codes and

ordinances is required.

2/5”

1/5”

Door Hinge

Back of unit

Top View

1/5”

Side View

Important Notes:

• Choose a location that has

ambient temperatures above

50°F and below 95°F.

Operation outside these

temperatures may result in

lowered efficiency or cause

other adverse effects.

• This unit MUST be installed

in an area protected from the

elements, e.g., wind, rain,

water spray or drips.

• The wine refrigerator should

not be located next to ovens,

grills or other high heat

sources.

• Do not kink or pinch the

power supply cord between

the wine refrigerator and wall

or cabinet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

No comments

EdgeStar CWR460DZ User Manual Page 7