EdgeStar OR320SS Owner's Manual download pdf (Page 7)

EdgeStar Outdoor refrigerator 4

Installation Clearance Requirements

When installing the outdoor refrigerator under a counter, follow the

recommended spacing dimensions shown.

• To ensure proper service access and ventilation, allow at least 1/2”

clearance at the back, 1” at top and 1/4” at sides. The installation should

allow the unit to be pulled forward for servicing, if necessary.

• The outdoor refrigerator should be installed on a firm and level surface

that will be able to support the entire weight of a fully loaded unit. It is

important for the outdoor refrigerator to be level in order to work properly.

If needed, you can adjust the height of the outdoor refrigerator by rotating

the feet. See the “Leveling the Outdoor refrigerator” section.

• A standard electrical supply (115 VAC only, 60 Hz), properly grounded

in accordance with National Electrical Code and local codes and

ordinances is required.

1/2”

1/4”

Door Hinge

Back of unit

Top View

1”

1/2”

Side View

Important Notes:

• Choose a location that has

ambient temperatures above

25°F and below 100°F.

Operation outside these

temperatures may result in

lowered efficiency or cause

other adverse effects.

• In a rainy environment, a

water-proof covering is

recommended.

• Do not kink or pinch the

power supply cord between

the outdoor refrigerator and

wall or cabinet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

EdgeStar OR320SS Owner's Manual Page 7