EdgeStar CWR531SZ Owner's Manual download pdf (Page 6)

Installing the Wine refrigerator

The wine refrigerator should be installed in accordance with local

electrical code requirements. The wine refrigerator should also be placed

in a location that is strong enough to support its total weight, keeping in

mind that it will weigh substantially more when fully loaded than when

empty.

Before you plug the wine refrigerator into a power supply, be sure to let it

stand upright for at least 24 hours to allow the compressor’s oils to settle.

Unpacking the Wine refrigerator

WARNING: Use two more people to move and install the wine

refrigerator. Failure to do so can result in back or other injury. Carefully

remove the packaging materials. Remove any shipping tape and glue

from your wine refrigerator before using. Do not use sharp instruments,

rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or

glue. These products can damage the surface of your wine refrigerator.

IMPORTANT: Do not remove any safety, warning, or product information

labels from your wine refrigerator.

Types of Installation

This wine refrigerator has been designed for free-standing, or built-in

installation. In every case, there must be adequate ventilation and access

for service.

Free-standing installation:

A free-standing installation will allow you to install the wine refrigerator in

almost any place you desire. You must follow the stated instructions for

electrical requirements, and leveling the wine refrigerator.

Built-in installation:

A recessed installation will allow you to install the beverage cooler under

a counter or in a kitchen cabinet provided the required clearance space

around the beverage cooler is followed.

It is necessary to allow adequate ventilation space around the unit (make

sure there is at least some ventilation room for the back of the unit). The

following additional items must be observed.

1. Place the wine refrigerator in front of the installation location. Adjust

the feet and place the unit flat on the floor or on a platform depending

on your installation requirements.

2. If the electrical outlet for the wine refrigerator is behind the cabinet,

plug in the wine refrigerator.

3. Push the wine refrigerator into position.

WARNING: Do NOT install the wine refrigerator behind a closed cabinet

door.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

No comments

EdgeStar CWR531SZ Owner's Manual Page 6