EdgeStar AP10002BL Owner's Manual download pdf (Page 12)

Draining the Unit

When the portable air conditioner is in cooling mode, or dehumidify

mode, it will remove moisture from the air. The condensed water

from the air will be collected in an internal reservoir and will be

evaporated and exhausted out of the exhaust hose. However, in

very humid conditions, the internal reservoir may fill completely.

This causes the air conditioner to turn off to avoid overflowing the

internal reservoir. When water tank is full a buzzer will sound eight

times and on the LED window will display error code “H8”.

Direct drainage

1. Remove the rubber drain plug from the drain port.

2. Connect a drain hose to the drain port.

The portable air conditioner will now drain through the drain hose.

Please note that this unit has no drain pump; all water will drain

with gravity only, i.e., only “downhill.”

Attach the drain hose clamp to the

back panel of the air conditioner

near the drain port with the screw.

Attach one end of the drain hose

to the drain port with the clip

provided.

Insert the rubber plug into the

other end of the drain hose and

secure clip provided.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

EdgeStar AP10002BL Owner's Manual Page 12