EdgeStar RP400MED User's Guide download pdf (Page 5)

EdgeStar Precision Refrigerator 2

Installing the Refrigerator

The refrigerator should be installed in accordance with local electrical

code requirements. The unit should also be placed in a location that is

strong enough to support its total weight, keeping in mind that it will weigh

substantially more when fully loaded than when empty.

Before you plug the precision refrigerator into a power supply, be sure to

let it stand upright for at least 24 hours to allow the compressor’s oils to

settle.

Unpacking the Precision refrigerator

WARNING: Use two more people to move and install the precision

refrigerator. Failure to do so can result in back or other injury. Carefully

remove the packaging materials. Remove any shipping tape and glue

from your precision refrigerator before using. Do not use sharp

instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to

remove tape or glue. These products can damage the surface of your

precision refrigerator.

IMPORTANT: Do not remove any safety, warning, or product information

labels from your precision refrigerator.

Free-standing installation:

A free-standing installation will allow you to install the precision

refrigerator in almost any place you desire as long as there is ample

clearance for proper heat ventilation. You must follow the stated

instructions for electrical requirements, and leveling the precision

refrigerator.

• The precision refrigerator should be installed on a firm and level surface

that will be able to support the entire weight of a fully loaded unit. It is

important for the precision refrigerator to be level in order to work

properly. If needed, you can adjust the height of the precision refrigerator

by rotating the feet.

• Choose a location that has ambient temperatures above 50°F and below

95°F. Operation outside these temperatures may result in lowered

efficiency or cause other adverse effects.

• This unit MUST be installed in an area protected from the elements,

e.g., wind, rain, water spray or drips.

• The precision refrigerator should not be located next to ovens, grills or

other high heat sources.

• Do not kink or pinch the power supply cord between the precision

refrigerator and wall or cabinet.

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

EdgeStar RP400MED User's Guide Page 5